Resin Cast Joint

Resin Cast joint and termination 1/2/3/3.5/4 Core upto 1.1 kv for XLPE/PVC/PILC Cable

Resin Cast Straight Joint and Termination Kit is used for making durable, insulated, and moisture-proof joints or terminations for low-voltage (LV) and medium-voltage (MV) power cables. It uses a special two-part polyurethane or epoxy resin poured into a mould to completely encapsulate and seal the cable connection.

FEATURES:-

 

Excellent electrical insulation — prevents partial discharge.

Strong environmental sealing — suitable for waterlogged and contaminated areas.

Low maintenance — once cured, it becomes a permanent seal.

-Harsh industrial and coastal environments.

-Oil & gas, chemical plants, and renewable energy sites.

 

Kit selection chart

For 11 KV XLPE Cable
STRAIGHT THROUGH JOINT
Cable Size (Sq.mm.) Kit Code
3x25-50HCS-11
3x70-120HCS-12
3x150-240HCS-13
3x300-400HCS-15
For 22 KV XLPE Cable
STRAIGHT THROUGH JOINT
Cable Size (Sq.mm.) Kit Code
3x25-50HCS-41
3x70-120HCS-42
3x150-240HCS-43
3x300-400HCS-45
For 33 KV XLPE Cable
STRAIGHT THROUGH JOINT
Cable Size (Sq.mm.) Kit Code
3x50-95HCS-51
3x120-185HCS-52
3x240-400HCS-53

Resin Cast joint and termination 3 Core upto

 

 Resin Cast Straight Joint and Termination Kit is designed for 3-core power cables up to 36 kV with XLPE, PVC, or PILC insulation. Kit provides complete electrical insulation and mechanical protection using high-dielectric-strength resin encapsulation. It ensures a moisture-proof, corrosion-resistant, and mechanically robust solution for underground, outdoor, or industrial installations.

FEATURES

 

 

-Suitable for 3-core XLPE, PVC, or PILC cables up to 36 kV

-High-dielectric-strength resin provides excellent electrical insulation

-Complete moisture sealing – prevents water ingress in underground or submerged installations

-Corrosion and chemical resistant – withstands acids, alkalis, oils, and industrial contaminants

-No heat source required – safe for use in hazardous or flammable environments

-Robust mechanical protection – resists impact, vibration, and compression

-Compatible with copper and aluminium conductors

-Maintenance-free once installed

For 11 KV XLPE Cable
STRAIGHT THROUGH JOINT
Cable Size (Sq.mm.) Kit Code
3x25-50HCS-11
3x70-120HCS-12
3x150-240HCS-13
3x300-400HCS-15
For 22 KV XLPE Cable
STRAIGHT THROUGH JOINT
Cable Size (Sq.mm.) Kit Code
3x25-50HCS-41
3x70-120HCS-42
3x150-240HCS-43
3x300-400HCS-45
For 33 KV XLPE Cable
STRAIGHT THROUGH JOINT
Cable Size (Sq.mm.) Kit Code
3x50-95HCS-51
3x120-185HCS-52
3x240-400HCS-53